↧
Radio DELTA Tuareg
↧
Help 307 1.6hdi completely dead
Hi i have a 2006 307 1.6hdi that was working great and a friend of mine has one to we thought his dash was bad so we tested it in mine
and ended up messing up the millage
so i removed the bsi and removed the eeprom from it but when i put it back in the dash turned on for a few seconds then all went dead apart from the wipers and headlights always on wether key in or not
so i got another bsi and virginized it but the car is still dead no lights on dash nothing key does nothing
i have pp2000 but i cant get it to find the car at all not even the vin or anything it cant find any ecus
i have power to the obd port and have reinstalled pp2000 3 times now with fresh installs of windows and the unit clicks when it is trying to connect to the car but cant find anything
im at a complete loss any help would be amazing
and ended up messing up the millage
so i removed the bsi and removed the eeprom from it but when i put it back in the dash turned on for a few seconds then all went dead apart from the wipers and headlights always on wether key in or not
so i got another bsi and virginized it but the car is still dead no lights on dash nothing key does nothing
i have pp2000 but i cant get it to find the car at all not even the vin or anything it cant find any ecus
i have power to the obd port and have reinstalled pp2000 3 times now with fresh installs of windows and the unit clicks when it is trying to connect to the car but cant find anything
im at a complete loss any help would be amazing
↧
↧
VIRTUAL READ: EU Kess v2 5.017 2.47
Happy new year guys.
I read a lot about the virtual read function of Ksuite 2.47. Seems like some of the members here have had suceeded with the EU china clones.
Can someone please explain how it is done? And how safe it is? For now i use Ktag all the time for full backup, and then flash with Kess. But would really appreciate the VR function!!
I read a lot about the virtual read function of Ksuite 2.47. Seems like some of the members here have had suceeded with the EU china clones.
Can someone please explain how it is done? And how safe it is? For now i use Ktag all the time for full backup, and then flash with Kess. But would really appreciate the VR function!!
↧
Astra j display replace
hello if anyone knows if it is possible to change the display only on the same basic GID, it is also VIN to change as on the radio, or replace it and the radio will recognize it without programming
Thanks
Thanks
↧
[MEGA] Road Map China PREMIUM 2018-2
↧
↧
BMW CCC Flash dump
Hi everybody
Can someone share Hw 9.8 flash dumps 2x 28f256j3c for BMW ccc?
thank you in advance
Can someone share Hw 9.8 flash dumps 2x 28f256j3c for BMW ccc?
thank you in advance
↧
2007 Honda Accord Airbag Crash Data
↧
EGS ISN reset required
Hi. Would anyone be able to help with a reset of the EGS ISN on a f11? I have replaced the gearbox with used one. I got it coded via e-sys but I require to perform a reset of the EGS ISN. Can anyone help? TIA.
↧
French SQLiteDBs for Rheingold 4.15
Hi,
Could anyone share French SQLiteDBs for Rheingold 4.15 please ?
Thanks in advance
Could anyone share French SQLiteDBs for Rheingold 4.15 please ?
Thanks in advance
↧
↧
SD C4 NOT ACCESSIBLE
↧
W204 password key help urgnt
↧
W204 password key help urgnt
↧
2005 Honda stepwagon 93c66 dump needed
Need a dump for the above vehicle please
↧
↧
Mercedes ML 350 TC1797 EGR OFF
↧
Vas 5054a PassThru config error code 50 ?
Hi i have a Vas 5054a and i will use as a PassThru.
Now i have download the sae j2534-1 configuration Manager after click on test it show me the error code 50.
Driver are installed.
Can someone help ?
Now i have download the sae j2534-1 configuration Manager after click on test it show me the error code 50.
Driver are installed.
Can someone help ?
↧
egr off ML W166 EDC17CP46
↧
Vcc Pin Overload on Read ST10F280
Need help, got this error message Vcc pin overload. Check Vcc pin connection on xprog-m when I tried to read ST10F280 out of IAW 6LPB. I triple-checked the wiring connection to xprog-m box, they are correct. What could be at fault here?any idea
thanks
thanks
↧
↧
dpf OFF Land Rover SID 204
↧
JLR RTS ?
I need help finding a JLR RTS (Repair Times Searcher) the newest the better
Thanks
Thanks
↧
mercedes w208 eis dump
hi to all
could someone please check this dump to see if corrupt
i have customers eis and key
he said key was from car but i repaired key back to life
key was number 5 but in eis it was not used and ssid was different
i read password from key but was dubious of making a new key with this password
so i removed mcu from eis and read dump
ive made new nec key and eis says it programmed and enabled but eis refuse to turn
so either fault with dump or eis fault
eis on bench with 14v stable power
i think car was jump started and has caused this problem
i would be grateful of all help
kind regards
aroundlocks
ps and happy new year to all
could someone please check this dump to see if corrupt
i have customers eis and key
he said key was from car but i repaired key back to life
key was number 5 but in eis it was not used and ssid was different
i read password from key but was dubious of making a new key with this password
so i removed mcu from eis and read dump
ive made new nec key and eis says it programmed and enabled but eis refuse to turn
so either fault with dump or eis fault
eis on bench with 14v stable power
i think car was jump started and has caused this problem
i would be grateful of all help
kind regards
aroundlocks
ps and happy new year to all
merc w208 eis dump.rar | ||
File Type: |
![]() |
![]() |
Downloaded: | 1 times | |
Size: | 403 bytes |
↧