↧
Need checksum for edc15c7
↧
MED17.5 checksum error MPPS 18
Hello all,
I was hoping to get some help understanding the following:
Car: Golf VI GTI 211Hp
Engine: CCZB
Ecu: MED17.5 TC1766
Software: 5K0907115
Hardware: 1037510467
It is a non TPROT version (hw 0040)
I have read with MPPS 18 through OBD
I got a 2MB file
Current software was allready tuned (stage 1 + Popcorn) ,
owner wanted it back to stock.
Got a ori from alientech database (same nrs)
Flashing went fine, till mpps said checksum block error.stock
After that car did crack but no start, and fan started after a few seconds.
Tried to flash the ori file (1st file) back, same error.
I then decided to use KTAG , reading went fine, only i now have a 1.5MB MPC , instead of the 2MB flash file that i got reading with MPPS
Tried to flash ori file back with KTAG, but ktag keeps saying "operation not allowed"
Any ideas on how to get the ecu working again, any input or help would greatly be appreciated
Mpps read & alientech ori file in attachment
Thanks in advance
I was hoping to get some help understanding the following:
Car: Golf VI GTI 211Hp
Engine: CCZB
Ecu: MED17.5 TC1766
Software: 5K0907115
Hardware: 1037510467
It is a non TPROT version (hw 0040)
I have read with MPPS 18 through OBD
I got a 2MB file
Current software was allready tuned (stage 1 + Popcorn) ,
owner wanted it back to stock.
Got a ori from alientech database (same nrs)
Flashing went fine, till mpps said checksum block error.stock
After that car did crack but no start, and fan started after a few seconds.
Tried to flash the ori file (1st file) back, same error.
I then decided to use KTAG , reading went fine, only i now have a 1.5MB MPC , instead of the 2MB flash file that i got reading with MPPS
Tried to flash ori file back with KTAG, but ktag keeps saying "operation not allowed"
Any ideas on how to get the ecu working again, any input or help would greatly be appreciated
Mpps read & alientech ori file in attachment
Thanks in advance
obd read and stock.zip | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 209.32 KB |
↧
↧
Stage 1 Citroen DS4
↧
ODIS problem
↧
Looking for full boot backup MED17.5
Hi guys
Looking for a full backup , if anyone has this..it would be greatly appreciated
MED17.5
5K0907115
0261S04951
1037510467
Golf VI GTI 2.0
CCZB
Thanks in advance
Looking for a full backup , if anyone has this..it would be greatly appreciated
MED17.5
5K0907115
0261S04951
1037510467
Golf VI GTI 2.0
CCZB
Thanks in advance
↧
↧
I need immo off edc15c7 peugeot boxer
Hi guys I need immo off. I tried some ecuvonix solution in flash and I disconnected immobox , car start but check engine light is ON and no DTC errors
can anyone help with good solution please
ecu edc15c7 2plug
0281012597_1037375198
eprom 5p08
can anyone help with good solution please
ecu edc15c7 2plug
0281012597_1037375198
eprom 5p08
0281012597_1037375198.zip | ||
File Type: |
![]() |
![]() |
Downloaded: | 1 times | |
Size: | 153.78 KB |
↧
Kess V2 on DAF truck, protocol 483
Hello there, is there anybody who tested protocol 483 on DAF truck with Delphi ETC3 ECU with Kess V2 clone ? Please share experience how it works reading/writing.
↧
inmobox fiat 201 word
↧
NEW XDOS 03.2020 START KEY AUTHENTICITY VERIFICATION FIX WIN10x64
New StartKeyControl FIX prevents authenticity verification of XDOS activation key and allows carefree online work.
StartKey will not be deleted from online server!
XDOS 03/2020 FIX is compatible to operating system Win10x64BIT only!
![[Image: SKCver20.png]]()
![[Image: 01.png]]()
![[Image: C001.png]]()
![[Image: C002.png]]()
![[Image: C003.png]]()
Password via PM
- for active forum members ONLY!
Will be send by my decision after submitting of Feedback:
REPUTATION
& THANKS
!!!
StartKey will not be deleted from online server!
XDOS 03/2020 FIX is compatible to operating system Win10x64BIT only!
![[Image: SKCver20.png]](http://i.ibb.co/9qvkD7b/SKCver20.png)
![[Image: 01.png]](http://i.ibb.co/2vbM6yK/01.png)
![[Image: C001.png]](http://i.ibb.co/B4mMPzB/C001.png)
![[Image: C002.png]](http://i.ibb.co/129K1fR/C002.png)
![[Image: C003.png]](http://i.ibb.co/cXLx1qs/C003.png)
Password via PM
![[Image: 1603933.png]](http://upload.akusherstvo.ru/images/1603933.png)
Will be send by my decision after submitting of Feedback:
REPUTATION
![[Image: 1603927.png]](http://upload.akusherstvo.ru/images/1603927.png)
![[Image: 1603926.png]](http://upload.akusherstvo.ru/images/1603926.png)
SKC-VERIFY-0320-1064.txt | ||
File Type: |
![]() |
![]() |
Downloaded: | 4 times | |
Size: | 73 bytes |
↧
↧
NEW XDOS 03.2020 START KEY AUTHENTICITY VERIFICATION FIX WIN10x32
New StartKeyControl FIX prevents authenticity verification of XDOS activation key and allows carefree online work.
StartKey will not be deleted from online server!
XDOS 03/2020 FIX is compatible to operating system Win10x32BIT only!
![[Image: SKC20.png]]()
![[Image: 01.png]]()
![[Image: C001.png]]()
![[Image: C002.png]]()
![[Image: C003.png]]()
Password via PM
- for active forum members ONLY!
Will be send by my decision after submitting of Feedback:
REPUTATION
& THANKS
!!!
StartKey will not be deleted from online server!
XDOS 03/2020 FIX is compatible to operating system Win10x32BIT only!
![[Image: SKC20.png]](http://i.ibb.co/7XvGNdT/SKC20.png)
![[Image: 01.png]](http://i.ibb.co/2vbM6yK/01.png)
![[Image: C001.png]](http://i.ibb.co/B4mMPzB/C001.png)
![[Image: C002.png]](http://i.ibb.co/129K1fR/C002.png)
![[Image: C003.png]](http://i.ibb.co/cXLx1qs/C003.png)
Password via PM
![[Image: 1603933.png]](http://upload.akusherstvo.ru/images/1603933.png)
Will be send by my decision after submitting of Feedback:
REPUTATION
![[Image: 1603927.png]](http://upload.akusherstvo.ru/images/1603927.png)
![[Image: 1603926.png]](http://upload.akusherstvo.ru/images/1603926.png)
SKC-VERIFY-0320-1032.txt | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 73 bytes |
↧
Tech 2 update
Hello community
Can anyone share a link who i can download Tech 2 win
which i can update my Tech 2 to the latest version ?
in german
Thanks
Can anyone share a link who i can download Tech 2 win
which i can update my Tech 2 to the latest version ?
in german
Thanks

↧
SUPERB 2 3.6 FSI UPDATE DASH
Hi anybody can advise me I would like to update the SW in the dashboard. I would like to get the oil temperature and cruise control. Immo data will remain in the device after SW update. And I also want to ask which .SGO to record. I just got to 3T1920841K_0610_S.frf or 3T1920841K_0610.frf. Don't have a file? WELL THANK YOU
My current diagnostic report is as follows:
Data source:
vehicle
Hardware Part Number:
3T1920841B
Component Number:
3T1920841B
Hardware version number:
H06
Software version number:
0110
Date of made:
18.09.2009
coding:
110D00
Flossing possibility
unknown
System designation:
COMBI
Basic variant of ASAM:
BV_DashBoardUDS
ASAM 2D / ODX data record
EV_Kombi_UDS_VDD_RM09
ASAM 2D / ODX Data Record Version:
A04040
used variant of ASAM / ODX SG:
EV_KombiUDSVDDRM09_A04
Equipment Code:
00 00 00 00 00 00 00 00
System shortcut:
J285
My current diagnostic report is as follows:
Data source:
vehicle
Hardware Part Number:
3T1920841B
Component Number:
3T1920841B
Hardware version number:
H06
Software version number:
0110
Date of made:
18.09.2009
coding:
110D00
Flossing possibility
unknown
System designation:
COMBI
Basic variant of ASAM:
BV_DashBoardUDS
ASAM 2D / ODX data record
EV_Kombi_UDS_VDD_RM09
ASAM 2D / ODX Data Record Version:
A04040
used variant of ASAM / ODX SG:
EV_KombiUDSVDDRM09_A04
Equipment Code:
00 00 00 00 00 00 00 00
System shortcut:
J285
↧
merc me2.8 dtc off
↧
↧
Could enyone decode this please thanks in advance
Hi finally bought the car i was after long story short i need the radio code the serial number is SEZ1Z3F1742516
↧
MHI2_ER_AU57x_P3634 update error
Hi guys ![hi hi]()
I'm new here and I have some questions:
After update my firmware by engineering menu (red)from MIH2_ER_AUG11_S0040 to MHI2_ER_AU57x_P3634 I have received one error ab LTE_ALS6:0 error 151.I have passed forward but how to update without error?
After activating green menu how to active audi smartphone interface?
Any help appreciated.

I'm new here and I have some questions:
After update my firmware by engineering menu (red)from MIH2_ER_AUG11_S0040 to MHI2_ER_AU57x_P3634 I have received one error ab LTE_ALS6:0 error 151.I have passed forward but how to update without error?
After activating green menu how to active audi smartphone interface?
Any help appreciated.

↧
Telematics CD 1668273900
Friends, can someone have Telematics 1668273900?
really needed)
really needed)
↧
0pa file request
Hello to all CT members.
I want to leave a CAS2 at the factory, the level is E89X-05-09-530
ZUSB: 6981416
If someone can pass me the file 6981416.0pa
And the file for a CAS3 + 9226238.0pa
Thank you
I want to leave a CAS2 at the factory, the level is E89X-05-09-530
ZUSB: 6981416
If someone can pass me the file 6981416.0pa
And the file for a CAS3 + 9226238.0pa
Thank you
↧
↧
PSdZData_Lite_v.4.22.40 - MEGA
F001_19_11_550
F001_20_03_540
F010_19_11_520
F010_20_03_540
F020_19_11_538
F020_20_03_540
F025_19_11_540
F025_20_03_540
F056_19_11_550
F056_20_03_540
I001_19_11_557
I001_20_03_530
K001_19_11_512
K001_20_03_510
KE01_19_07_500
KE01_20_03_500
KS01_19_07_501
KS01_20_03_500
M013_19_11_530
M013_20_03_500
S15A_19_11_570
S15A_20_03_540
S15C_19_11_551
S15C_20_03_540
S18A_19_11_570
S18A_20_03_540
F001_20_03_540
F010_19_11_520
F010_20_03_540
F020_19_11_538
F020_20_03_540
F025_19_11_540
F025_20_03_540
F056_19_11_550
F056_20_03_540
I001_19_11_557
I001_20_03_530
K001_19_11_512
K001_20_03_510
KE01_19_07_500
KE01_20_03_500
KS01_19_07_501
KS01_20_03_500
M013_19_11_530
M013_20_03_500
S15A_19_11_570
S15A_20_03_540
S15C_19_11_551
S15C_20_03_540
S18A_19_11_570
S18A_20_03_540
PSdZData_Lite_v.4.22.40.txt | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 492 bytes |
↧
ISTA-D Offline correct ICOM configuration problem for updates (LAN settings issues)
Hi,
I am successfully updating with my ICOM BMW cars from the BMW dealership that I am working at.
However, I have the following error message (please check attached image) when I try to do it offline.
Can anyone tell me what is the correct ICOM configuration or settings I need to change in EDIABAS.ini or somewhere else to correctly configure this ? I have done a lot of reading and trials and errors but I am struggling to find a solution.
At the BMW dealership I am not getting this error message.
I want to configure this without a router and just use the correct files and the direct connection between my laptop and the ICOM.
Best rergards and stay home / garage and stay safe !
I am successfully updating with my ICOM BMW cars from the BMW dealership that I am working at.
However, I have the following error message (please check attached image) when I try to do it offline.
Can anyone tell me what is the correct ICOM configuration or settings I need to change in EDIABAS.ini or somewhere else to correctly configure this ? I have done a lot of reading and trials and errors but I am struggling to find a solution.
At the BMW dealership I am not getting this error message.
I want to configure this without a router and just use the correct files and the direct connection between my laptop and the ICOM.
Best rergards and stay home / garage and stay safe !
↧
FSC for 5AS
Hello.
Where I can get the FSCs for 5AS?
I want code Front Collision Warning (BE) and Pedestrian Warning (BF). I have factory Kafas2.
Thanks in advice
Where I can get the FSCs for 5AS?
I want code Front Collision Warning (BE) and Pedestrian Warning (BF). I have factory Kafas2.
Thanks in advice

↧