↧
Renolink_MultiVersions
↧
Please help me understand: ISTA P, D, +....
Hello everyone,
the last time I was here was in 2015 and since then I had for BMW diagnostics and coding only those programs:
- BMW Scanner
- INPA
- NCS Expert
We all got E models from around the year 2000 in our family so there was really no need to change anything about that and I got really good at those 3 apps over time. Before that I used Carsoft so you can imagine how uplifting that change was. Recently my brother bought a slightly damaged F model for cheap and asked me if I could get a reader for that too. After making myself smart on the internet I found out that the best way would be to just jump right in
and I bought an ESYS cable with the ESYS SW and ISTA+. I got it all working and did my first diagnose of my E46 model on a DCAN cable in ISTA+ no problem. The program found even more errors then the BMW Scanner and INPA would.
I educated myself a bit about the ISTA versions but I still lack a bit of knowledge. Could please anyone tell me what the difference is between P and D and +? Is the + a combo of D and P? And what exactly can I do in expert mode (P version has it, D version no idea and + probably has it but nobody knows how to access it yet)? Or better yet: can the expert mode replace the NCS coding for me or is there someting I am missing?
Sorry if this is too long to read, just tried to shortly introduce myself and be polite
Thanks for any replies in advance
the last time I was here was in 2015 and since then I had for BMW diagnostics and coding only those programs:
- BMW Scanner
- INPA
- NCS Expert
We all got E models from around the year 2000 in our family so there was really no need to change anything about that and I got really good at those 3 apps over time. Before that I used Carsoft so you can imagine how uplifting that change was. Recently my brother bought a slightly damaged F model for cheap and asked me if I could get a reader for that too. After making myself smart on the internet I found out that the best way would be to just jump right in

I educated myself a bit about the ISTA versions but I still lack a bit of knowledge. Could please anyone tell me what the difference is between P and D and +? Is the + a combo of D and P? And what exactly can I do in expert mode (P version has it, D version no idea and + probably has it but nobody knows how to access it yet)? Or better yet: can the expert mode replace the NCS coding for me or is there someting I am missing?
Sorry if this is too long to read, just tried to shortly introduce myself and be polite

↧
↧
Help phaeton KESSY
Hello everyone I need your help about KESSY (93C88) from Phaeton V10 tdi
The original KESSY was in the water and lose PIN, the dump is corrupted
I buy a second used one and read eeprom
How i can adapt it for teach a new key because all key lost
PS: I have original pin from ECU
Thank you
The original KESSY was in the water and lose PIN, the dump is corrupted
I buy a second used one and read eeprom
How i can adapt it for teach a new key because all key lost
PS: I have original pin from ECU
Thank you
ECU 1 and 2 edc16u1 ori.rar | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 1.71 KB |
↧
2001 BMW Z3 Engine swap DME question
Customer called with some questions
he swamped the original engine M54 2.5 with a new engine M54 3l came from e46 330Ci from 2003
original set up was with DME MS43 ,EWS3 old plug .
Donor engine came with DME MS45.1 EWS 3
Wire harness still original.
whats the easiest solution to make this car run properly?
he swamped the original engine M54 2.5 with a new engine M54 3l came from e46 330Ci from 2003
original set up was with DME MS43 ,EWS3 old plug .
Donor engine came with DME MS45.1 EWS 3
Wire harness still original.
whats the easiest solution to make this car run properly?
↧
Mercedes C200 stage 1
can anyone give me a good stage 1 file please? Thanks in advance
HW: 6519040001
SW: 6519021901
VIN nr.: WDD2----
SW ver.:
Spare: 0064461540
Engine:
HW Ver.:
SW upg.: 6519034523
Installation: CRD3-651-WMA4ED3
a launch control or hardcut and egr off will be lovely if possible
HW: 6519040001
SW: 6519021901
VIN nr.: WDD2----
SW ver.:
Spare: 0064461540
Engine:
HW Ver.:
SW upg.: 6519034523
Installation: CRD3-651-WMA4ED3
a launch control or hardcut and egr off will be lovely if possible
merc org.zip | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 1.39 MB |
↧
↧
Help I need immo off for me 7.9.9
↧
C205 AdBlue
Hi there,
I had an issue with Adblue due to the split wire on the additive line.
I bought a new line, planned to fit it this week, but the car run out of allowed mileage.
I got "Start not possible"
I tried to reset it with OBD II, It clears faults(they reappear when I turn ignition) but doesn't allow the car to start.
Does anyone know what's the best idea to get the car running again?
List of faults in the attachment.
I had an issue with Adblue due to the split wire on the additive line.
I bought a new line, planned to fit it this week, but the car run out of allowed mileage.
I got "Start not possible"
I tried to reset it with OBD II, It clears faults(they reappear when I turn ignition) but doesn't allow the car to start.
Does anyone know what's the best idea to get the car running again?
List of faults in the attachment.
IMG-2401.JPG | ||
File Type: |
![]() |
![]() |
Downloaded: | 3 times | |
Size: | 2.74 MB |
↧
Parametrization file for 5M0907357F VW Passat B7
Hi,
I flashed my AFS
Address 55: Headlight Range (J745) Labels:. 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 E HW: 7L6 907 357 C
Component: AFS-ECU H04 0105
Revision: -------- Serial number: --------------
Coding: 029600000B000200
Shop #: WSC 73430 115 00052
with
Address 55: Headlight Range (J745) Labels:. 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 F HW: 7L6 907 357 C
Component: AFS-ECU H04 0111
Revision: -------- Serial number: --------------
Coding: 0000000000000000
Shop #: WSC 00000 000 00000
5 Faults Found:
10490624 - No End-of-Line Programming
B2013 00 [137] - -
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
13636352 - Control module not coded
U1013 00 [137] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5276144 - Power Output Module for Left Headlamp
C1081 F0 [009] - Not Coded
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5276400 - Power Output Module for Right Headlamp
C1082 F0 [009] - Not Coded
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5275220 - Headlight
C107E 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
It is not allowing me to code, gives Error 22: Conditions not correct or request sequence error.
I read I will need Parametrization file to code.
Please help me with correct procedure and Parametrization file for for 5M0907357F VW Passat B7
Thanks.
I flashed my AFS
Address 55: Headlight Range (J745) Labels:. 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 E HW: 7L6 907 357 C
Component: AFS-ECU H04 0105
Revision: -------- Serial number: --------------
Coding: 029600000B000200
Shop #: WSC 73430 115 00052
with
Address 55: Headlight Range (J745) Labels:. 5M0-907-357-V3.clb
Part No SW: 5M0 907 357 F HW: 7L6 907 357 C
Component: AFS-ECU H04 0111
Revision: -------- Serial number: --------------
Coding: 0000000000000000
Shop #: WSC 00000 000 00000
5 Faults Found:
10490624 - No End-of-Line Programming
B2013 00 [137] - -
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
13636352 - Control module not coded
U1013 00 [137] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5276144 - Power Output Module for Left Headlamp
C1081 F0 [009] - Not Coded
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5276400 - Power Output Module for Right Headlamp
C1082 F0 [009] - Not Coded
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
5275220 - Headlight
C107E 54 [137] - Missing Calibration / Basic Setting
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 1
Fault Frequency: 1
Reset counter: 71
Mileage: 130102 km
Date: 2019.07.03
Time: 21:16:22
It is not allowing me to code, gives Error 22: Conditions not correct or request sequence error.
I read I will need Parametrization file to code.
Please help me with correct procedure and Parametrization file for for 5M0907357F VW Passat B7
Thanks.
↧
Request: ISTA+ 4.18.14 Install Files
Can someone upload a password free ISTA+ 4.18.14 Install Files?
↧
↧
Need ORI file for Ford Fusion 1.4 SID 804
↧
NBT evo Id6 - missing text after active
Hello,
NBT evo from ECE, donor VIN G30 G454368. Nertherland language.
Retrofit car is F10 C602789, English language.
Purchased femtoevo from FSCmap (region change, carplay, vim) but after activation there no text on all menu headers and sub menus.
Plugged 6WA cluster but still errors.
Need your help.
Thanks
NBT evo from ECE, donor VIN G30 G454368. Nertherland language.
Retrofit car is F10 C602789, English language.
Purchased femtoevo from FSCmap (region change, carplay, vim) but after activation there no text on all menu headers and sub menus.
Plugged 6WA cluster but still errors.
Need your help.

Thanks
A9B7D583-2C6E-4CB1-A171-E6139A17775E.jpeg | ||
File Type: |
![]() |
![]() |
Downloaded: | 5 times | |
Size: | 1.57 MB |
↧
For sale Abt tuning ecu
↧
W906 facelift Vmax
Hey,
somebody have coded W906 2014 OM642 CR60NFZ_EURO6,
Vmax succesfully? I coded engine ecu succesfull to 161km/h with Vediamo, but still 89km/h max.
ESP need coding also?
Thanks in advance!
somebody have coded W906 2014 OM642 CR60NFZ_EURO6,
Vmax succesfully? I coded engine ecu succesfull to 161km/h with Vediamo, but still 89km/h max.
ESP need coding also?
Thanks in advance!

↧
↧
Ford Cmax pscm error U3000
I have a C-Max steering RACK dead with error u3000 (eeprom corrupt)..
I found a virgin file and now the steering works but the error u3000 remains ..
SW .
AV6T-14C217-BA
AV6C-3C579-EA
AV6C-3D070-RE
Would I need the eeprom 95320 dump?
ATTACHED THE CORRUPTED FILE and virgin..
THANK YOU SO MUCH!!!
I found a virgin file and now the steering works but the error u3000 remains ..
SW .
AV6T-14C217-BA
AV6C-3C579-EA
AV6C-3D070-RE
Would I need the eeprom 95320 dump?
ATTACHED THE CORRUPTED FILE and virgin..
THANK YOU SO MUCH!!!
ford cmax 95320 pscm.rar | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 1.64 KB |
↧
Odis Online problem
Hi.Anyone have this problem with Odis Online
I buy obd2xxxxx Odis Online for 1 Month
Now got proxifier etc and login codes
I try use it and it gives me
error ODS2006E
Authenticationwith ID xxxxxxxxxxxxxxxxxxxxxxxx is marked as blocked
Please contack your support specialist
Is it computer blocked or Vas6154
as Vas6154 was brand new Audi original never used Online before
Can you help?
Regards Marko
I buy obd2xxxxx Odis Online for 1 Month
Now got proxifier etc and login codes
I try use it and it gives me
error ODS2006E
Authenticationwith ID xxxxxxxxxxxxxxxxxxxxxxxx is marked as blocked
Please contack your support specialist
Is it computer blocked or Vas6154
as Vas6154 was brand new Audi original never used Online before
Can you help?
Regards Marko
↧
m57 dde4 launch control help needed
As title says, could anyone map my file to have launch/popcorn at 2500rpm. Car is e38 2000y,diesel, manual 193hp, dde4.
Link to file E38 m57
Link to file E38 m57
↧
Can ayone explain please how to clone SIMOS PCR 2.1
Hi guys
please can ayone explaint to me how to clone PCR 2.1
I have 03L 906 023 CF
have here are attached readings by galetto G54 by OBD - 2048KB
but when I compared them they are identical Crazy - and I think is flash
I did read by Ktak master and I have
two eeproms size 8KB
I been able unlock replacement by resistors but I dont know if I can write ORIGINAL eeprom to replacement
Any advice appreciate
please can ayone explaint to me how to clone PCR 2.1
I have 03L 906 023 CF
have here are attached readings by galetto G54 by OBD - 2048KB
but when I compared them they are identical Crazy - and I think is flash
I did read by Ktak master and I have
two eeproms size 8KB
I been able unlock replacement by resistors but I dont know if I can write ORIGINAL eeprom to replacement
Any advice appreciate
03L 906 023 CF (5WP42822 AA).rar | ||
File Type: |
![]() |
![]() |
Downloaded: | 0 times | |
Size: | 204.83 KB |
↧
↧
Nissan murano z50 Euro2
↧
Astra H pin immo UEC
↧
I need ori flash flie Fiat Ducato MJD 8F3
Hello fiernds
I need ori flash with dpf off for fiat ducato
MJD 8F3 . BN BC.0116590.a
55261982
hw10w/3042-bn04
BT7S6U4BP
I need ori flash with dpf off for fiat ducato
MJD 8F3 . BN BC.0116590.a
55261982
hw10w/3042-bn04
BT7S6U4BP
↧