VEDIAMO 4.02.02 FIX FOR PROGRAM ACTIVATION

December 23, 2018, 8:15 am

≫ Next: Installed 2015 NV200 motor/tranny in a 2013 NV200. TCM question

≪ Previous: NA 2019 cic maps from usb to dvd

$

0

0

VEDIAMO 4.02.02 - ACTIVATION FIX
Due to several forum members requests:




1.   Download and unpack the RAR archive.

2.   Copy entire content into: Vediamo/BIN folder and replace existing files.

3.   Start the Vediamo and post your Hardware ID in topic here, to get of the activation key.

Password FREE!
Pleas no forget submitting of Feedback: REPUTATION    and THANKS 

Vedi_422FX.txt
File Type:
Downloaded:	1 times
Size:	70 bytes

---

Installed 2015 NV200 motor/tranny in a 2013 NV200. TCM question

December 23, 2018, 8:21 am

≫ Next: Help DDE7 EDC17CP02 Immo off

≪ Previous: VEDIAMO 4.02.02 FIX FOR PROGRAM ACTIVATION

$

0

0

I have a 2013 NV200 cargo van that needed a new motor. I found a complete motor and transmission that came out of a 2015 model. The only difference is the transmission was different style. I installed the new motor and tranny and all the wire harness matched up fine. When I hook the battery up, the running lights come on thinking the van is driving down the road. When I put the key into the ignition and turn it on position the lights will go off. The fuel pump will never start so fuel will never get to motor. It will crank over if I try. Turned off and key out the lights come back on and stay on. I installed the original ECM and same issue so it didn't matter if I had the 2013 or 2015 ECM. I went to the TCM which I only have the 2013 as they did not provide me with the 2015 TCM and unplugged it. The lights go out when it is unplugged. So, I'm guessing my original TCM will not work with the different transmission and so it's messing up the system? I'm reading all about having to re-program these by spending lots of money for software and a pass through device and reprogramming these units. Not 100% sure this is what is needed and before I go spend money on software and waste money need advice. I looked on nissan site https://www.nissan-techinfo.com/J2534.aspx to lookup files for the unit and having trouble. The TCM I have has part#310363LM1A which I can find that on the Techinfo site but I can't find a part# for TCM for the 2015. Do they use the same TCM#? I'm confused into this and I thought these TCM's could be used for different cars and just re-programmed to whatever. Anyways, need help to figure out what I need to do and what I have to buy to get this working.

Help DDE7 EDC17CP02 Immo off

December 23, 2018, 8:48 am

≫ Next: Dr Gini Beta 014 update ?

≪ Previous: Installed 2015 NV200 motor/tranny in a 2013 NV200. TCM question

$

0

0

Please help me with DDE7 EDC17CP02 IMMO OFF

EDC17CP02.rar
File Type:
Downloaded:	5 times
Size:	746.39 KB

Dr Gini Beta 014 update ?

December 23, 2018, 9:23 am

≫ Next: V8/X6 codemaster 5

≪ Previous: Help DDE7 EDC17CP02 Immo off

$

0

0

Hello,

is it possible to update the Dr Gini Beta014 to Beta021 or B022 ?
The old version didn't have an Activation Code..........

thx

Markus

V8/X6 codemaster 5

December 23, 2018, 9:39 am

≫ Next: Help Needed! Coding used EPS on my BMW E82

≪ Previous: Dr Gini Beta 014 update ?

$

0

0

Hi

I have a v8/x6 automotive key cutting machine which I need codemaster 5 for as I’ve lost my original usb stick that came with it, and my computer has died the death.

Thanks in advance

Help Needed! Coding used EPS on my BMW E82

December 23, 2018, 9:51 am

≫ Next: Me vs adding key CAS3+ crypted

≪ Previous: V8/X6 codemaster 5

$

0

0

Hello everybody! 
My EPS,on my E82 (2008) got water damaged so i decided to swap it to a used one.I have installed the new (used) EPS but i still got the yellow steering icon on the instrument cluster and the steering is also stiff.
Can anyone help me out with the coding? I got a K+Dcan cable.
Thank you very much!

Me vs adding key CAS3+ crypted

December 23, 2018, 11:37 am

≫ Next: Mileage correction tools

≪ Previous: Help Needed! Coding used EPS on my BMW E82

$

0

0

Hi im really struggling to learn to add a key to a BMW X6 2009...
In all cases the car still works perfectly with the original key it has.

My experiments:

All read/write CAS3+ MCU eeprom with Xprog ( OK, tested several times)

FVDI Clone==> Tried to do it all by OBD, failed.
Tried loading cas eeprom to key maker==> Result made Key then wrote file to CAS3. The remote unlocks/locks the car but doesnt unlock the dash/ start car.

Hitag2 Clone==>Loaded cas eeprom=>Made Key=>Wrote File to CAS3.
Resulting again in key remote only locks/unlocks the car.

Tango Clone==>Loaded cas eeprom+DME dump=> Made Key=>Wrote File to cas3 ==> Key remote doesnt even lock/unlock car.

Reading the Key tango made, it didnt even record the VIN ¿? although it did change to Locked State.
I ordered new blank keys, maybe those keys where bad?¿

AutoHex II/BMW Explorer are out of my price range.

So what would be the best option to cover cas3 and cas3+ ?¿

-Xhorse Multitool ( I read good reviews although i think i would have to downgrade the cas3 versions and leave them downgraded?).

BMW ISTA-P Clone ( Does this make Keys? or only diag & coding units)

TMPro2 Original + Software 130 BMW,Mini CAS SiemensVDO ?

Thanks

Mileage correction tools

December 23, 2018, 12:55 pm

≫ Next: I need the code for this car radio Kia Model : K101R

≪ Previous: Me vs adding key CAS3+ crypted

$

0

0

Hello all what is a most commonly used tool for doing this on most cars? I've got Delphi and Elm  327, can these be used? If yes what software is needed?
My son has a Nissan Pixo 1.0 he needs to   rectify a discrepancy  if this can be done any guidance would be very much appreciated 

---

I need the code for this car radio Kia Model : K101R

December 23, 2018, 1:04 pm

≫ Next: BMW E7X and E9X Series Headlights and High Beam Coding

≪ Previous: Mileage correction tools

$

0

0

Hello every body, I need the code for this car radio  Kia  Model  :  K101R  , Thank you

BMW E7X and E9X Series Headlights and High Beam Coding

December 23, 2018, 2:12 pm

≫ Next: 2006 BMW E90 CAS2 in bootmode need help

≪ Previous: I need the code for this car radio Kia Model : K101R

$

0

0

On E6X series I know how to code headlights and high beams together to flash, is this possible on E7X and E9X series?

2006 BMW E90 CAS2 in bootmode need help

December 23, 2018, 3:01 pm

≫ Next: Nav greyed

≪ Previous: BMW E7X and E9X Series Headlights and High Beam Coding

$

0

0

Costumer called today that he has CAS2 in boot mode 
 he was doing updates and the process failed 
 now the car does not start no communication with cas is there any solution to bring this back to life ?

Nav greyed

December 23, 2018, 3:19 pm

≫ Next: Help making an order for keys...

≪ Previous: 2006 BMW E90 CAS2 in bootmode need help

$

0

0

Hello, 
i have a mini r58 2012 with this problem:
Start the car and the nav works but after 10 min my navigation icon is greyed out and voice commands are also not working. 
I have tried update the map but i Can't, when i introduce the code(buy in official service Mini) don't works.(wrong code)


Can anybody help me?

Help making an order for keys...

December 23, 2018, 5:22 pm

≫ Next: Bmw CCC polish menu

≪ Previous: Nav greyed

$

0

0

Hi guys. Firstly, Merry Christmas and Happy New Year. 


I'm thinking to order some keys from China but not sure if they should be 315 or 433 mhz, as I know here in  Europe most of the cars work on 433 mhz.
I'm interested only in europe makes.
Please could someone give some info or any source so I can learn a little bit more about keys?
Also any trusted source where to buy the key?
I'm new to key programming and not sure where to start, so please HELP ☺
Thanks in advance.

Bmw CCC polish menu

December 23, 2018, 9:07 pm

≫ Next: Does Vediamo work with Vas5054?

≪ Previous: Help making an order for keys...

$

0

0

OHi guys. My friend has Bmw e70 with German menu and w e would like to change it to polish   Is it possible to get polish language ? 
I know that coding should be done but problem is with dvd with software. 
Thx for reply.

Does Vediamo work with Vas5054?

December 24, 2018, 12:24 am

≫ Next: RCD300 radio code

≪ Previous: Bmw CCC polish menu

$

0

0

Hello,

I hava a Question: Does Vediamo for Mercedes work with Pass True Vas5054? I Think it would not work but maybe it would work.

If it would not work what must I buy for it?

Thanks.

---

RCD300 radio code

December 24, 2018, 12:49 am

≫ Next: Display Key for F series

≪ Previous: Does Vediamo work with Vas5054?

$

0

0

rergards

I need code from dump

rcd 300.rar
File Type:
Downloaded:	2 times
Size:	1.13 KB

Display Key for F series

December 24, 2018, 1:06 am

≫ Next: Airbag Hardware

≪ Previous: RCD300 radio code

$

0

0

seen videos about display key  works in E, F, any one know more info how to make this key work??

Airbag Hardware

December 24, 2018, 1:11 am

≫ Next: F serie bench setup no image on monitor

≪ Previous: Display Key for F series

$

0

0

Is it worth to buy UPA clone from china?
Od what do you prefer for srs airbags units mainly?
NowI have carprog and xprog ?

F serie bench setup no image on monitor

December 24, 2018, 1:17 am

≫ Next: Reminder: E-Sys Launcher Premium 2.8.2 will not work after 30.12.2018

≪ Previous: Airbag Hardware

$

0

0

I've a F series bench setup and when I connect a F10 cic with monitor on it the monitor doesn't go on.
My setup only contains a zgw module with most.
In INPA I also don't see ignition signal.
Pin 42 (ignition signal) on the zgw is connected to 12V.

How can I get the monitor working? I've checked the wiring a couple of times of the monitor and it is correct.

Reminder: E-Sys Launcher Premium 2.8.2 will not work after 30.12.2018

December 24, 2018, 1:29 am

≫ Next: J500 b200049 fault internal check sum

≪ Previous: F serie bench setup no image on monitor

$

0

0

Dear Friends,

I just want to remind the many E-Sys Launcher Premium Users, that Tokenmaster has limited the Certificate in his free 2.8.2 Version to 30.12.2018. That means: After this Date you will not longer be able to use this software.

We had this case allready last year, and I am not sure that Tokenmaster will extend the free usage with a new version again.

So, if you have any important conding to do: Hurry up!


Merry Christmas and a happy new year!

BR
Simon

3.JPG
File Type:
Downloaded:	22 times
Size:	58.15 KB