Xentry PassThru should be installed on Windows x64 to support modern vehicles, such as Euro5/6, W205, W213, ... However, VAS5054A doesn't work on 64bits as passthru. There is 64bits device driver for VAS5054A but there is no PassThru driver working on 64bits. You may try Actia driver instead but here is a patched 32bits PassThru driver working on Windows x64. Xentry recognize it and work with W205, etc.
WARNING: Use it on your own rick only for test purpose.
What you need:
(1) VAS5054A hardware (good quality).
(2) VAS5054A PDU_API driver installation file in ODIS. You can also find it somewhere on this forum.
(3) (option) New firmware. You may need VAS5054 fix for no AMB2300 Chip. The firmware included here is version 1.20.41 with no AMB2300 patch.
(4) Softing_VAS5054A_PassThru_Driver_x64.zip (attached here)
(5) 64bit Windows 10
(6) (option) DC 12V power adapter, 2 jumper wires for temporary power.
Pre Installation:
(1) Install the latest VAS5054A PDU_API Driver. For example, version 1.20.41, 1.20.42, ...
(2) Install Xentry PassThru and do all patches.
Installation:
(1) Copy "Program Files (x86)\Softing\*" to your HDD "C:\Program Files (x86)\Softing\*"
(2) Copy "PDU-API\*" to your HDD "C:\PDU-API\*". Do not change the directory name.
(3) Double click on "Softing_VAS5054A_PassThru_21_14_008.reg" and install it.
(4) Make a shortcut of "SftngCM.exe" on Desktop.
(5) Right click on "C:\Program Files (x86)\Softing\Edic Driver\win7\softingedic7_ntamd64.inf" and install.
(6) Connect the VAS5054A adapter using an USB cable. Connect it to a temporary power(12V DC adapter) or OBD-2 port.
(7) Check "Control Panel/Devices Manager/Softing...". If not installed correctly, update the device driver manually.
(8) Make a shortcut of "EDICConfig.exe" on Desktop.
Post Installation:
(1) Connect the VAS5054a to a temporary power(12V DC adapter) or ODB-2 port.
(2) Run "SftngCM.exe" on desktop as administrator.
(3) Choose "VAS5054A" and type the serial number (maybe 082145725).
(4) Select "Test" and click on "Start Test".
- RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.
- YELLOW dot : PC <-> VAS5054A communicates.
- GREEN dot : PC <-> VAS5054A <-> Vehicle communicates.
Tip:
(1) ".NET Framework 2.0/3.0/3.5" needs to be installed if not installed automatically. You can install it by selecting on "Control Panel/Programs and Features/Turn Windows features on or off/.NET Framework 3.5(includes .NET 2.0 and 3.0)"
(2) Temporary power to VAS5054A for test purpose : Ground to either pin 4 or 5. 12V DC to pin 16.
(3) You can upgrade the EDICDriver in "Program Files (x86)\Softing\EDICDriver" if you have newer version. It's usually included in the PDI_APU driver.
![[Image: attachment.php?aid=80679]]()
Press THANKS and REPU if it helps you.
WARNING: Use it on your own rick only for test purpose.
What you need:
(1) VAS5054A hardware (good quality).
(2) VAS5054A PDU_API driver installation file in ODIS. You can also find it somewhere on this forum.
(3) (option) New firmware. You may need VAS5054 fix for no AMB2300 Chip. The firmware included here is version 1.20.41 with no AMB2300 patch.
(4) Softing_VAS5054A_PassThru_Driver_x64.zip (attached here)
(5) 64bit Windows 10
(6) (option) DC 12V power adapter, 2 jumper wires for temporary power.
Pre Installation:
(1) Install the latest VAS5054A PDU_API Driver. For example, version 1.20.41, 1.20.42, ...
(2) Install Xentry PassThru and do all patches.
Installation:
(1) Copy "Program Files (x86)\Softing\*" to your HDD "C:\Program Files (x86)\Softing\*"
(2) Copy "PDU-API\*" to your HDD "C:\PDU-API\*". Do not change the directory name.
(3) Double click on "Softing_VAS5054A_PassThru_21_14_008.reg" and install it.
(4) Make a shortcut of "SftngCM.exe" on Desktop.
(5) Right click on "C:\Program Files (x86)\Softing\Edic Driver\win7\softingedic7_ntamd64.inf" and install.
(6) Connect the VAS5054A adapter using an USB cable. Connect it to a temporary power(12V DC adapter) or OBD-2 port.
(7) Check "Control Panel/Devices Manager/Softing...". If not installed correctly, update the device driver manually.
(8) Make a shortcut of "EDICConfig.exe" on Desktop.
Post Installation:
(1) Connect the VAS5054a to a temporary power(12V DC adapter) or ODB-2 port.
(2) Run "SftngCM.exe" on desktop as administrator.
(3) Choose "VAS5054A" and type the serial number (maybe 082145725).
(4) Select "Test" and click on "Start Test".
- RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.
- YELLOW dot : PC <-> VAS5054A communicates.
- GREEN dot : PC <-> VAS5054A <-> Vehicle communicates.
Tip:
(1) ".NET Framework 2.0/3.0/3.5" needs to be installed if not installed automatically. You can install it by selecting on "Control Panel/Programs and Features/Turn Windows features on or off/.NET Framework 3.5(includes .NET 2.0 and 3.0)"
(2) Temporary power to VAS5054A for test purpose : Ground to either pin 4 or 5. 12V DC to pin 16.
(3) You can upgrade the EDICDriver in "Program Files (x86)\Softing\EDICDriver" if you have newer version. It's usually included in the PDI_APU driver.
Press THANKS and REPU if it helps you.
| screencapture.png | ||
| File Type: |
|
 |
| Downloaded: | 15 times | |
| Size: | 139.98 KB | |